FacF Drawings
 

Hi people, i make this thread to show my drawing in SkyscraperPage, and to receive some feedback, i would like to know yours opinions about my drawings

My last drawings:

https://cdn.discordapp.com/attachmen...00/unknown.png

https://cdn.discordapp.com/attachmen...18/unknown.png

I started adding more shadows in my latests buildings

Your drawings look excellent... keep up the good work!

Thanks Koops, you are also a good artist here, is incredible the work you did with drawing Canada

Great drawing! :tup:

Thanks!

I measured Mirante do Vale with Google Earth (Google Earth heights are more trustable than "official" ones, and his height is 134m, also if you look a image of the building you will see that is lower than Altino Arantes for example

Nooo, i measure the 3D model in Google Earth (in the cities that have that) i take the height from the top of the building and the height from the ground and substract those numbers

https://cdn.discordapp.com/attachmen...48/unknown.png

In this case i have 108m of elevation in the top of the building and 29m in the ground, substracting those numbers the height is 79m

My newest drawings!

https://cdn.discordapp.com/attachmen...66/unknown.png

I added drawings principally in Cordoba and my homecounty "3 de Febrero", i also have planned to add some drawings to Rosario

Looks really good

It would be awesome if you Expanded into Canada

Same building but different drawings along the time

https://cdn.discordapp.com/attachmen...32/unknown.png

The first drawing was when I was just starting to draw buildings for Skyscraperpage, when I converted my 3D models of buildings to 2D drawings.

The second one was when I finally learned to draw buildings from 0, in a scale of 10 pixels per floor, then I resized them but they were a bit blurry.

The third drawing is current, after changing the scale and drawing the buildings directly in scale of 3 pixels per floor or 4 depending on how high the floors are, so I avoid changing the size of them to make them look sharp.

Im really happy about how much i improved with the quality of my drawing, also i hear any criticism to my drawings



Thanks Anders!

Possibly one day, i dont have plans for it for now

It's great.
I also define one floor as 3-4 pixels and draw it.
If you draw a complex or large building, your skills will improve.
It is still difficult for me to draw a building with a lot of curves.

I started doing drawings again, and there are my last ones:

https://i.imgur.com/MihEKWJ.png

I really liked the Altino Arantes building, At first I didn't like how my drawing looked, it didn't convince me at all, but I think it turned out well

One thing im planning to do is drawing the pre 1959 highrises in latin american, there are a lot of these in Argentina and Brazil

Nice! Great drawings.

Thanks Anders, your drawings are very nice too

Good stuff! I particularly like Torre Sancor Seguros. Keep up the hard work! :cheers:

Yeah, curves are hard, especially when they are of CW

Although lately I have started to draw the glass facades with a single color and then add the texture of the sky, define the opacity of it, the color and finally make the texture of the glass

A thing i started using from your drawing it's your way of making the shadows, i fell that adding those improves the drawing a lot


Thanks Koops, It is one of the ones that took me the least time to do, between half hour and a one hour

Some of my new drawings:

https://i.imgur.com/zKaZpqo.png

This time i do some office towers in Sao Paulo

https://i.imgur.com/B7CBGdi.png

.

They looks good too